Stay Aware
BatteryMole® Monitor All Purpose
 
This product works in any 12V lead-acit battery application. It attaches directly to the battery's terminals and makes use of the recently introduced Bluetooth Low Energy (BLE) technology to communicate with Android 4.3+ smartphones or tablets. (Note: Apple iOS is not yet available). When installed in a deep-cycle application such as solar, marine, golf cart, forklift, recreational vehicle, electric motorcycle, etc., the current temperature, voltage and charge state of the battery are displayed 24/7. When attached to the starter battery in an RV, auto, motorcycle or boat, the engine's start time and start voltage are also captured. U.S. Patent 8,386,199, is then used to analyze the starter battery's state of health and warn the operator when the battery is nearing its end-of-life.
 
Displays the following information:
· Battery Temperature
· Charge State of the Battery
· Battery Voltage
· Engine Start Time (when applicable)
· Engine Start Voltage (when applicable)
 
Detects the following alarm conditions:
· Low Battery Charge
· Weak Engine Start Voltage
· Slow Engine Start Time
              
Application Download and Documentation »
Made in USA from global parts:
This product was designed and is assembled, programmed and tested in Tempe Arizona by 4 Peaks Technology LLC. It contains globally made components. The microprocessor is designed and manufactured by Arizona based Microchip Technology (processor assembled in Thailand). The bluetooth radio was designed by EM Microelectronic in Switzerland and productized by C-Max Asia Ltd. In Scottsdale Arizona, Elite Solutions Inc. designed the injection mold for the product case and manufactures all of our cases. In Phoenix Arizona, Proinnovative Inc. prints our product name and FCC regulatory information on these cases.